Double Reduced Cold-Rolled Tinplate Coil DescriptionTinplatecoilis a steel product with a stampable thin steel coilas the base, tin plating on the surface, and multiple protective films. It is characterized by corrosion resistance, non-toxic, odorless, glossy surface, l
Opening Hours: Monday - Saturday 8 am to 7 pm
- Time Office:
Monday to Friday 8:00am - 7:00pm
- Call Us:
+86 13396253653
- Email:
admin@sdyulun.com
Tinplate Coil
Double Reduced Cold-Rolled Tinplate Coil
- Date.November 4, 2024
- Category.Tinplate Coil
- Keyword.Big fire special steel, high strength steel plate, steel industry supply and demand, steel suppliers
Double Reduced Cold-Rolled Tinplate Coil Description
Tinplate coil is a steel product with a stampable thin steel coil as the base, tin plating on the surface, and multiple protective films. It is characterized by corrosion resistance, non-toxic, odorless, glossy surface, light weight, high strength. In the meanwhile, it is easy to weld and process, aside from a strong adaptability to ambient temperature. Double cold-reduced tinplate coil is usually supplied with a stone surface finish and a flow-brightened tin coating. When ordering double cold-reduced tinplate coil, the purpose of manufacture for which the material is intended should be stated. Double reduced cold-rolled tinplate coil is relatively less ductile than single reduced cold-rolled tinplate coil and has very distinct directional properties, so for some uses, for example for built-up can bodies, the direction of rolling should be stated.
Product Parameters
Product Name | Double Reduced Cold-Rolled Tinplate Coil |
Thickness | 0.18mm-0.50mm |
Width | 260mm-980mm |
Length | Support customization |
Tin Coating | General: 2.8g or 5.6g, can be produced according to your needs |
Substrate Type | MR / SPCC / L / D |
Reference Standard | GB/T 2520, JIS G3303, JIS G3315, DIN EN 10202, DIN EN 10203 |
Surface State of Tinplate
Surface State | Features |
Light Surface | Electroplated tin smooth raw material strip after melting treatment to obtain the glaze,Smooth surface with very fine grindstone pattern |
Stonetextured Surface | Electroplating tin raw material with the glaze obtained after melting treatment,Grindstone pattern with certain direction |
Silvercolor Surface | Electroplating tin raw material with the glazed surface obtained after melting treatment, the surface is rough and dull |
Mattless Surface | The surface of the substrate is rough and dull, and the tin plating layer is not soft melting |
Substrate Type
Substrate Type | Introduction |
MR | The most general steel, steelmaking impurity residue less, excellent mechanical properties and corrosion resistance |
L | Used for the production of acidic contents (oranges, yellow peaches, pineapples, etc.), and the inner surface of the food cans for iron high corrosion resistance tinplate substrate steel, such tinplate is often calledKPlate |
D | Used to produce two pieces of high-processing tin plate substrate steel, such tin plate is often called.DIMaterial |
SPCC | Chinese characteristics, using ordinary hot rollingSPHCProduces, usually used for miscellaneous tank purposes. |
Coating Weight
Classification | Representation of Tin Coating Weight | Tin Plating Nominal Weight (g/m2) | Minimum Average Tin Plating Weight (g/m2) |
Equal Tin Plating (E) | 1.1/1.1 | 1.1/1.1 | 1.8 |
2.2/2.2 | 2.2/2.2 | 4.0 | |
2.8/2.8 | 2.8/2.8 | 5.0 | |
5.6/5.6 | 5.6/5.6 | 10.5 | |
Differentiated Tin Plating (D/A) | 2.2/1.1 | 2.2/1.1 | 2.0/0.9 |
2.8/1.1 | 2.8/1.1 | 2.25/0.9 | |
5.6/1.1 | 5.6/1.1 | 5.05/0.9 | |
2.8/2.2 | 2.8/2.2 | 2.25/2.0 | |
5.6/2.2 | 5.6/2.2 | 5.05/2.0 | |
5.6/2.8 | 5.6/2.8 | 5.05/2.25 |
Chemical Composition
No. | C | Si | Mn | S | P | Cu | Ni | Cr | Mo |
D | 0.12 | 0.03 | 0.6 | 0.05 | 0.02 | 0.2 | 0.15 | 0.1 | 0.05 |
L | 0.13 | 0.03 | 0.6 | 0.05 | 0.15 | 0.03 | 0.04 | 0.06 | 0.05 |
MR | 0.13 | 0.03 | 0.6 | 0.05 | 0.2 | 0.2 | 0.2 | 0.1 | 0.05 |
Mechanical Properties & Applications
Standard Name | Nominal Hardness HR30TS | Strong Yield MPA | Scope of Application |
T-1 | 49 | 230 /-50 | Drawing requirements, drawn ironing cans, nozzles, nozzles, closures |
T-2 | 53 | 245 /-50 | Ring and plug, dome, closure, shallow pull and special tank parts |
T-2.5 | 55 | 260 /-50 | Battery cell, small can cover and body |
T-3 | 57 | 275 /-50 | Cans and cans, large diameter caps, crown caps |
T-3.5 | 59 | 290 /-50 | Can body, closure and crown lid |
T-4 | 61 | 340 /-50 | Can body, closure and crown lid |
T-5 | 65 | 480 /-50 | Cans and cans |
Ordering Notes
The ordering elements for tin plating generally include: standard grade (including steel grade code, annealing method and other information such as MR T-3 CA), size (the default order is thickness * width * length, tin plating amount ((different thickness plating) Tin needs to add A/D as the marking line mark, if not, no marking line will be marked), surface, order quantity, etc.
When ordering tin plating, please confirm with our sales staff the end use, such as canbody, ends, twist off caps, crown cork, EOE, etc., as well as the contents, special contents such as milk powder, high protein food, mushrooms, fruits, etc.;
Mark Doe
Galvanized coils are our top choice for durability and
consistency.
The zinc layer
uniformity saves us time in post-processing, and your team's technical
support is
always
helpful.
Mahan Selon
We have been purchasing yulun galvanized steel coils for
the quality
has
consistently exceeded our expectations. The coating uniformity, corrosion
resistance, and
surface finish meet our strict standards, making them ideal for
construction.
